manualshive.com logo in svg

Motorola MC75A, User Manual, Page: 61 / 232

Share
Download
Motorola MC75A User Manual Download Page 61

Chapter 3 Data Capture

Introduction

The MC75A offers three types of data capture options:

•

Laser scanning

•

Imaging

•

Color digital camera.

Laser Scanning

An MC75A with an integrated laser scanner has the following features:

•

Reading of a variety of bar code symbologies, including the most popular 1-D code types. 

•

Intuitive aiming for easy point-and-shoot operation.

Scanning Considerations

Typically, scanning is a simple matter of aim, scan, and decode and a few quick trial efforts master it. However, 
consider the following to optimize scanning performance:

•

Range
Any scanning device decodes well over a particular working range — minimum and maximum distances from 
the bar code. This range varies according to bar code density and scanning device optics.
Scanning within range brings quick and dependable decodes; scanning too close or too far away prevents 
decodes. Move the scanner closer or further away to find the right working range for the bar codes being 
scanned. 

•

Angle
Scanning angle is important for promoting quick decodes.

NOTE

To perform data capture a scanning enabled application must be installed on the MC75A. A sample scanning 
application can be downloaded from the Zebra Support site at http://support.symbol.com.

Summary of Contents for MC75A









































































































































































































































Reviews:

No comments