Motorola MC75A User Manual Download Page 185

Page: 185 / 232

Maintenance & Troubleshooting 8 - 13

MC75A battery is not
charging.

MC75A was
removed from MSR
or MSR was
unplugged from AC
power too soon.

Ensure MSR is receiving power. Ensure MC75A is attached
correctly. Confirm main battery is charging under

Start

Settings

Power

Battery is faulty.

Verify that other batteries charge properly. If so, replace the faulty
battery.

The MC75A is not
fully attached to the
MSR.

Detach and re-attach the MSR to the MC75A, ensuring it is firmly
connected.

During data
communication, no
data transmits, or
transmitted data was
incomplete.

MC75A detached
from MSR during
communications.

Reattach MC75A to MSR and retransmit.

Incorrect cable
configuration.

See the system administrator.

Communication
software is not
installed or
configured properly.

Perform setup as described in the

MC75A Integrator Guide.

Table 8-8

Troubleshooting the Magnetic Stripe Reader (Continued)

Symptom

Possible Cause

Action

Summary of Contents for MC75A









































































































































































































































Search results

Summary of Contents for MC75A

Reviews:

Related manuals for MC75A

Brands by name

Popular brands

Motorola MC75A, User Manual

Search results

Summary of Contents for MC75A

Reviews:

Related manuals for MC75A

Brands by name

Popular brands