DSR-6100
65
L1/R1 and L2/R2 Fields
Default: Off
Use the appropriate field (either L1/R1 or L2/R2) to choose one of the following
test tones:
•
1000
•
4040, 3960
(two tones)
At the completion of the test, press the ENTER button to disable the test, exit the
field, and return the field to the default setting (Off).
Video Test Signal Menu
Press the
buttons until the Video Test Signal menu appears. Use the full-field
video test signal to display different test patterns by selecting the Pattern field.
Caution: This selection replaces video.
Pattern Field
Default: Off
Press the
4
button until the cursor is at the Pattern label, and press the ENTER
button to move into the field. Press the
buttons to display the test patterns.
Choose from the options listed below:
Test signals override any active service component, and the DSR-6100 displays
diagnostics over the video test patterns if diagnostics are enabled. (For details, see
"Menus Field" on page 63.) To disable the selected video test signal, return to the
Off setting or press the ENTER button to exit the field.
NTSC/PAL M Test Pattern Options
Color Bar
IRE 100 Ramp
NTSC 7 Comb
Red Field
NTSC 7 Comp
5 Step Stair
Unmod Y Ramp
Off (Default)
