Motorola DSR-6100 Operator'S Manual Download Page 60

Page: 60 / 98

Status Display Menus

Status display menus provide information regarding the current status of the

DSR-6100. This menu lists important Satellite Multiplex Decrypter parameters.
These fields are not editable, and the displayed information is either (1) the result of
changes in an installation or channel selection menu, or (2) a parameter the

DSR-6100 reports as part of its operation.

Status0 Menu

Press the



buttons until the Status0 menu appears.

This status-only field displays the following status conditions. Press the

button

until the cursor is at the Health label, and press the ENTER button. Use the



buttons to scroll through any errors displayed.

•

Good

No Alarm Condition. The DSR-6100 is
working correctly.

•

Alarm:Video lost

The DSR-6100 does not have primary Video
Out. This could be due to loss of authorization
or signal.

•

Alarm:Signal lost

The DSR-6100 does not have signal lock.

•

Alarm:Authorization lost

The DSR-6100 is not authorized for the

current service.

•

Alarm:Fan fault

One or more fans have stopped working and
need to be replaced.

•

Alarm:Transcodes Fault

One of the transcoders has faulted.

Note: When the Alarm Trigger (described on page 33) is set to Disable, the
STATUS0 Health field displays Good, even if error conditions are present.

Summary of Contents for DSR-6100



































































































Search results

Summary of Contents for DSR-6100

Reviews:

Related manuals for DSR-6100

Brands by name

Popular brands

Motorola DSR-6100, Operator'S Manual

Search results

Summary of Contents for DSR-6100

Reviews:

Related manuals for DSR-6100

Brands by name

Popular brands