Motorola DSR-6100 Operator'S Manual Download Page 67

Page: 67 / 98

DSR-6100

This is represented as the number of distinct pixels in the horizontal dimension and

the number of scan lines.

Note: The Video Resolution field does not include a designation for

(p) progressive or (i) interlaced to denote the scan type for the SD video.

BitRt Field

The BitRt (Bit Rate) field indicates the data rate of the transcoded video.

Status10(HD) Menu

Press the



buttons until the Status10HD menu appears. This screen displays

the audio encoding configuration for the transcoded HD program.

Audio Field

Use this field to choose which audio channel to display the status. Press the

button until the cursor is at the Audio field, then use the



buttons to choose the

first audio channel (0) or the second audio channel (1). The default is 0. Press the

ENTER button to confirm the selection and exit the field.

Format Field

This field is always set to PSTHRU (pass-through) and cannot be changed.

Mode Field

The Mode field indicates the mode (stereo or mono) of the transcoded audio for the

selected audio channel. Dashes (---) designate no information is available.

BitRt Field

The Bit Rate field indicates the data rate of the transcoded audio. Dashes (---)

designate no information is available.

Summary of Contents for DSR-6100



































































































Search results

Summary of Contents for DSR-6100

Reviews:

Related manuals for DSR-6100

Brands by name

Popular brands

Motorola DSR-6100, Operator'S Manual

Search results

Summary of Contents for DSR-6100

Reviews:

Related manuals for DSR-6100

Brands by name

Popular brands