3
30
Audio1 and Audio2 Menus
Use these menus to customize the audio output. Press the
buttons until the
Audio1 or Audio2 menu appears (shown below).
DialNorm Field
Default: On
The DialNorm field allows the user to normalize speech levels to a constant level
over all channels—raising or lowering the volume of the dialogue to a level that is
appropriate for the background sound track.
Press the
4
button until the cursor is at the DialNorm label. Press the ENTER button
to move into the field. There are two options, On and Off. Press the
buttons to
change the setting. Press ENTER to confirm the selection and exit the field.
AudioMix Field
Default: Stereo
Note: If the audio input mode is stereo and you are connecting to a mono
modulator, you must set this field to Mono.
This field allows selection of the audio processing options. Press the
4
button until
the cursor is at the AudioMix label, and press the ENTER button to move into the
field. Press the
buttons to display the options:
•
Stereo
Stereo output on both left and right channel
•
Surround
Enhanced stereo with surround pass-through
•
Mono
Mono output on left channel
•
Dual Mono Mono output on both left and right channels
Caution: If Dual Mono is selected, a caution screen appears. If Dual Mono is selected
and then changed to another option, the caution screen appears again.
This caution message denotes possible conflicts between this menu and the
language selection menus that could mute the audio. By pressing the ENTER
button (ignoring the caution), the DSR-6100 changes to Dual Mono, and uses the
language previously selected for Mono (or Stereo) for both left and right channels.
E On Stereo Moderate
AUDIO1
DialNorm
AudioMix
Compress
E On Stereo Moderate
AUDIO2
DialNorm
AudioMix
Compress
Press E to continue or to stop
CAUTION: Check audio language selection
