3
56
Status2 Menu
This menu does not appear if the Input field (described on page 25) is set to ASI
In or GigE In. Press the
buttons until the STATUS2 menu appears. This
screen displays the source name, channel number, and the signal quality of the
incoming signal.
Source Field
This status-only field displays the source name, which was entered by the
programmer or network operator at the encoder/uplink to identify the source.
Dashes are displayed when no information is available.
Channel Field
This status-only field displays the selected Virtual Channel number (from the
Channel menu). Dashes are displayed when no information is available.
Quality Field
This status-only field displays a number from 1 to 100 so that the quality level of
the signal can be judged. The signal quality is also displayed as a large bar graph in
the Status3 menu. If it is 35 or less, take action at your site to increase the dish size
or improve the Low Noise Block (LNB) to prevent occasional loss of output.
Status3 Menu
This menu does not appear if the Input field (described on page 25) is set to ASI In
or GigE In. Press the
buttons until the STATUS3 menu appears. This screen
displays the quality level of the signal as a large bar graph that expands to fill the entire
LCD screen. The following example shows the quality at about 75.
E ---
----
---
STATUS2 Source Channel Quality
E |||||||||||||||||||||||.......
STATUS3 Signal Quality
