Motorola DSR-6100 Operator'S Manual Download Page 53

Page: 53 / 98

DSR-6100

Subtitle Field

Default: def

Press the

button until the cursor is at the Subtitle label, and press the ENTER

button to move into the field.

Use one of the following options to set the language:
•

If the Display is set to All, use the Subtitle field to specify any language. Use
the arrow button (

4

) to enter the three-letter code.

•

If the Display is set to Avail, the Subtitle field will list the currently available
languages.

Press the



buttons to specify the desired option. Press the ENTER button to

confirm the selection and exit the field.

Note: If the Display field is set to Status, use the read-only Subtitle field to view the
current language.



TEXT LANG



Display



Subtitle

E All def

Summary of Contents for DSR-6100



































































































Search results

Summary of Contents for DSR-6100

Reviews:

Related manuals for DSR-6100

Brands by name

Popular brands

Motorola DSR-6100, Operator'S Manual

Search results

Summary of Contents for DSR-6100

Reviews:

Related manuals for DSR-6100

Brands by name

Popular brands