- 64 -
5.0
5.0
SEATING ACCESSORIES & COMFORT ADJUSTMENTS
SEATING ACCESSORIES & COMFORT ADJUSTMENTS
4a
C
HEST
B
AR
H
EIGHT
A
DJUSTMENT
C
HEST
B
AR
S
WING
-A
WAY
F
EATURE
WARNING! Risk of serious injury or loss of body support/stability
•
The Chest Bar must ALWAYS be installed when the Rovi-MPS system is in the standing position.
5.13.1 CHEST BAR HEIGHT ADJUSTMENT:
Loosen the set screw in the post height adjustment locks (
left & right
), and adjust each lock position (equally)
along the posts until the desired chest bar height is achieved (
1
). Re-tighten the set screws to secure the
adjustment locks into position.
5.13.3 CHEST BAR REMOVAL AND SWING-AWAY FEATURE:
To remove the chest bar completely, lift the chest bar/pad straight upward to disengage it from both (left & right)
mounting brackets (
3
). To use the swing-away feature, disengage the shorter post length from its mounting
bracket (
4a
), leaving the opposite (longer) post still installed inside its mounting bracket, then swing/rotate the
chest bar outward (
4b
)
1
4b
post height
adjustment lock
(set screw)
3
5.13 CHEST BAR/CHEST
RESTRAINT
ADJUSTMENT:
5.13.2 CHEST BAR DEPTH ADJUSTMENT:
Loosen the adjustment screws (x2) in the chest bar mounting bracket on each armrest (left & right), then adjust
the fore/aft position of the mounting bracket along the glide rail (
2
) until the desired chest bar depth is
achieved. Both mounting brackets are typically adjusted equally to keep the chest bar parallel with the back,
however the brackets may also be offset to position the chest bar on an angle (if desired). Re-tighten the
adjustment screws to secure the mounting brackets into position.
2
mounting
bracket
C
HEST
B
AR
R
EMOVAL
C
HEST
B
AR
D
EPTH
A
DJUSTMENT
glide rail
2