- 26 -
DANGER! A malfunctioning joystick could cause unintended/erratic movement resulting in
death, serious injury, or damage.
•
If unintended/erratic movement occurs, stop using the wheelchair immediately and contact your service
provider or a qualified technician
.
DANGER! An improperly connected joystick could cause loss of power resulting in death,
serious injury, or damage.
•
Ensure the joystick is securely connected to the controller
.
WARNING! Incorrect programming of a switch by users, caregivers or unqualified technicians
can result in serious injury or damage.
•
Programming of the operator/attendant switch MUST be performed by a qualified technician.
DANGER! A malfunctioning switch could cause unintended/erratic movement resulting in
death, serious injury, or damage.
•
If unintended/erratic movement occurs, stop using the wheelchair immediately & contact your service
provider or a qualified technician
.
3.1.2
PROGRAMMING A SEPARATE SWITCH CONTROL
A specialized hand-held programmer may be required to program the seating functions into the TRx switch
control. The M290 Remote Attendant Control included with our M-Series electronics
(see also
Section 4.1.2
)
may be used to program the individual actuators (seating functions) to the switch control. Programming via
the attendant control is password protected and may only be performed by a Qualified Service Technician.
During programming, each seat function may be configured to operate in either direct-mode or toggle-mode
depending on the number of power seating functions installed, and/or the preferences of the end user.
(For
instructions on how to operate your Rovi-MPS System using a separate switch, please refer to
Section 3.5
).
3.2.1
RNET LCD JOYSTICK FEATURES:
3.2 Understanding Your ROVI RNet Remote/Joystick:
LCD Display
(Seating Mode)
Power
Horn
Hazard Lights
Base Lights
(on/off)
Mode Select
Profile Select
(Drive Profile)
Turn Signal
(right)
Turn Signal
(left)
(Joystick Drive Control)
Speed Adjust
(Joystick Seat Control)
scroll/select
operate PPS
function
Joystick
RN
ET
LCD J
OYSTICK
(with Base Light Controls)
RN
ET
LCD J
OYSTICK
(without Base Light Controls)
3.0 PROGRAMMING
3.0 PROGRAMMING
AND
AND
OPERATING
OPERATING
YOUR
YOUR
ROVI-MPS SYSTEM
ROVI-MPS SYSTEM
LCD Display
(Drive Mode)
There are two models of RNet LCD Remote/Joysticks available for use with the Rovi-MPS System
: