- 42 -
WARNING! Risk of Serious Injury or Damage
Incorrect set up of this wheelchair performed by users/caregivers or unqualified technicians
can result in serious injury or damage.
•
User/Caregivers- DO NOT attempt to set up this wheelchair.
•
Set-up and programming of this wheelchair MUST be performed by a Qualified Technician.
4.0
4.0
ELECTRONICS
ELECTRONICS
Your UL Maxx Multi-Position Stander (MPS) System has been specifically programmed/ configured for
use prior to delivery. While certain seating system features and functions may be adjusted by the user
and/or attendant following delivery, to ensure your seating system is operating properly and safely, any
programming changes to the electronics must only be performed by a qualified technician.
Our M610 series (multi-function) seat control boxes are designed for maximum programmability and function
(up to 6 functions)
. All enhanced seat control boxes come standard with our
Remote Attendant Control
.
IMPORTANT!
The M-Series seat controls are equipped with built-in over-current protection. In the event
that a current spike occurs during operation of your power positioning system, the controller is designed to
go into a temporary shutdown to prevent damage to the electronics. If you experience a repeated controller
shutdown, please contact your service provider or our Technical Service Department for assistance.
Remote
Attendant Control
M610 Series Seat Control
(3-6 Function)
(includes Remote Attendant Control )
The seat control box is the brain behind our Power Positioning Systems. It is responsible for controlling the
available motor functions
(i.e.; tilt, recline, elevate, etc..),
as well as signaling the associated safety limits and
lockouts (
i.e.; DLO Limit, Reduced Speed Drive, etc..
). Motion Concepts uses state of the art electronics to
operate our power positioning systems and ensure the safe operation of your wheelchair system. The Rovi-
Multi-Position Stander (MPS) System is configured with our enhanced (
M610 series
) electronics, in combination
with
Rovi RNet
power base electronics.
4.1 Seat Control Box
4.1.1 M610 SERIES SEAT CONTROL
4.1.2 M290 REMOTE ATTENDANT CONTROL:
The M290 Remote Attendant Control serves dual purpose as both an attendant control box for the available
seat functions, as well as a hand-held electronics programmer for certain seating system features.
In
Standard Mode
the Remote Attendant Control functions as an attendant control switch/display for the
power positioning system.
In
Program Mode
, the Remote Attendant Control functions as a hand-held programmer to configure various
seating system parameters/limits. Programming access is password protected and restricted to qualified
Technical Service personnel.
There are 3 key components in our system electronics:
Seat Control Box
,
Wiring Harnesses
&
Limit Switches/
Sensors.
The following sections provide information/instructions related to each of these components.