manualshive.com logo in svg

Motion Concepts MPS MAXX MPSS, Owner'S Manual, Page: 23 / 88

Share
Download
Motion Concepts MPS MAXX MPSS Owner'S Manual Download Page 23

- 23 -

2.0

2.0

SAFETY INFORMATION

SAFETY INFORMATION

2.12   Technical Data

Our  Motion Concepts Modular Power Stander (MPS) System can vary depending on the final configuration
of the seating system, including the type and number of accessories installed onto the system.  The following
section is provided to illustrate the overall range of dimensions for our MPS system, taking into account the
various positioning configuration and accessories offered by Motion Concepts

IMPORTANT! 

The following dimensional information is provided for the Motion Concepts MPS

system only.  It does not include the power wheelchair base.

2.12.1  UL MAXX MODULAR POWER STANDING (MPS) SYSTEM

:

Parameters and Dimensions

i) 

OVERALL DIMENSIONS: 

Modular Power Standing System (MPSS):  

T

ILT

/R

ECLINE

E

LEVATE

/S

TAND

/P

OWER

CM L

EGS

OVERALL DIMENSIONS

(STANDER SYSTEM)

ACCESSORIES:

Rehab Back

Modular Arm Pads

14” Headrest Pad

Libra Cushion

Summary of Contents for MPS MAXX MPSS

























































































Reviews:

No comments