manualshive.com logo in svg

Motion Concepts MPS MAXX MPSS, Owner'S Manual, Page: 51 / 88

Share
Download
Motion Concepts MPS MAXX MPSS Owner'S Manual Download Page 51

- 51 -

5.0   

5.0   

SEATING ACCESSORIES & COMFORT ADJUSTMENTS

SEATING ACCESSORIES & COMFORT ADJUSTMENTS

ARMREST 
REMOVAL

If necessary, to avoid potential interference during wheelchair transportation, or for servicing the wheelchair,
the recline cantilever armrests can be fully removed from their mounting bracket on the recline back cane.  
To remove the armrests:
1.  Pull the plunger (detent) pin at the rear of the armrest (rotate pin 1/4-1/2 turn to remain unlocked) (

1

).

2.  Pull the armrest straight outward (way from the mounting bracket/recline back cane) (

2

).

     (

Note:

The armrest with the Remote/Joystick installed may be removed, but will still be connected via the

     joystick cable/harness)

3.  To re-install the armrest, repeat steps 1 and 2 in the reverse sequence;  Making certain that the armrest

     

plunger pin is fully engaged/locked into place following installation.

(left armrest shown)

WARNING!  Risk of serious injury or damage

• 

Do Not attempt to drive or operate the MPS-Maxx System with the armrests removed.

• 

ALWAYS ensure the armrest plunger pin is fully engaged prior to operating the MPS-Maxx System

pull plunger

out and twist

to unlock

1

2

5.2.4   REMOVING THE ARMREST

5.2  RECLINE CANTILEVER CANE MOUNTED ARMREST ADJUSTMENTS

..

cont’d

Summary of Contents for MPS MAXX MPSS

























































































Reviews:

No comments