- 54 -
5.0
5.0
SEATING ACCESSORIES & COMFORT ADJUSTMENTS
SEATING ACCESSORIES & COMFORT ADJUSTMENTS
IMPORTANT!
Seat width adjustments will require additional adjustments to the back assembly and
front rigging and seat pan. Due to the complexity of a seat width adjustment, this adjustment MUST be
performed a qualified service technician.
Your Motion Concepts Modular Power Standing (MPS) System is designed to allow for width adjustments
when necessary, to accommodate growth or positioning changes needed over the expected service life of
your seating system. The seat width adjustment range for the MPS system = 16” - 21” (41
cm
- 53
cm).
The MPS-Maxx seating system width has been pre-adjusted/configured to the meet user specifications prior to
delivery. If you feel and additional seat width adjustment is necessary, please contact your Local Dealer/Service
Provider for service.
IMPORTANT!
Seat depth adjustments may require additional compensating system adjustments to
ensure the safe operation and performance of the Rovi-MPS System. Seat depth adjustments should
only be performed by a Qualified Technician.
WARNING! Risk of Serious Injury or Damage.
• Altering the seat depth of your Rovi MPS System may compromise wheelchair stability and reduce
traction/drive control, and should ONLY be performed by a Qualified Service Technician.
• Following an adjustment to the seating system depth, ALWAYS carefully test the seating system over
the full range of power positioning functions to ensure there is no interference with the front riggings,
electronic harnesses or any other component of the seating system, and ensure the wheelchair DOES
NOT easily tip forward or backward.
• If at any point you have any concerns with the stability of your wheelchair, keep the wheelchair in an
upright stable position and contact your Dealer/ Service Provider immediately to arrange service.
5.4 Seat Width Adjustment
5.5 Seat Depth Adjustment
1. Insert the
extension tube
extension tube into the front of the armrest tube
with the mounting hole aligned vertically (
1
).
2. Install the armpad using the mounting hole in the extension
tube & a mounting hole in the armrest tube (
2
).
5.3.3 ARMREST EXTENSIONS:
Armrest
Extension
Tube
1
2
Armrest extension tubes
are available from Motion Concepts
(sold separately) when longer armrest lengths are required.
Your Modular Power Stander (MPS) system is designed to allow for depth adjustments when necessary, to
accommodate growth or positioning changes needed over the expected service life of your seating system.
The MPS-Maxx seating system is designed to allow an infinite range of depth adjustment between 16” - 20”
(41
cm
- 51
cm
). Basic seating system depth adjustments are performed at the rear of the seating system, by
adjusting rear back cane assembly along the ultra-rails (see
Fig. 1.
).
(
Note
: More complex depth adjustments
may also be performed via the fore/aft positioning of the seating system on the power base (interface plates)).
The depth of the seating system depth has been pre-adjusted/configured to the meet user specifications prior
to delivery. If you feel an additional depth adjustment is necessary, please contact you local Dealer/ Service
Provider to arrange for service.