manualshive.com logo in svg

Motion Concepts MPS MAXX MPSS, Owner'S Manual, Page: 28 / 88

Share
Download
Motion Concepts MPS MAXX MPSS Owner'S Manual Download Page 28

- 28 -

Joystick

(Drive) 

Control

1

2

3

In Drive Mode, the

Joystick Control

is used to drive, steer and stop the wheelchair (

3

). To drive and steer the

wheelchair, press the joystick control in the direction that you wish to travel. To stop, release the joystick control
so that it returns its home or neutral position. 

3.2.3  WHEELCHAIR DRIVE CONTROLS: 

(...cont’d)

Drive Profile Indicator

(There are 5 pre-programmed 

Drive Profiles available)

RNET LCD JOYSTICK DISPLAYS 

(IN 

DRIVE MODE

)

2

1

3

Joystick

(Drive) 

Control

Fig. 1b

Fig. 1a

In Power Seating Mode, an image of a wheelchair seating system will appear in the joystick display- 

see Fig.

2a/2b

.  The activated power seating function will be highlighted on the wheelchair image along with a description

of the seating function (

2

) 

(i.e.; Tilt, Stand, Legs etc...).

To scroll through all the available power positioning functions,

press the joystick control to the left or right (

3

) until the desired seat function appears in the joystick display. 

Note

: to return the joystick display back to Drive Mode, press the Mode Button a second time (or press the

Profile Button)

.

For a detailed summary of each of the power positioning functions available on the Rovi-MPS System please
refer to  

Section 3.3

- 

Understanding your Power Positioning Functions

.  For instructions on how to operate

your Rovi-MPS System using the RNet Remote Joystick, please refer to 

Section 3.4.

3.2.4 POWER POSITIONING SYSTEM CONTROLS:

POWER SEATING MODE:

The power positioning functions available on your Modular Power Standing (MPS) System may be
programmed to operate through the RNet Remote Joystick.  In order to access/operate the power
positioning functions thru the joystick, the joystick remote must be switched from ‘Drive Mode’ to ‘Power
Seating Mode’. This is accomplished by pressing the 

Mode Button

(

1

).

3.0  PROGRAMMING 

3.0  PROGRAMMING 

AND

AND

OPERATING 

OPERATING 

YOUR

YOUR

ROVI-MPS SYSTEM

ROVI-MPS SYSTEM

RN

ET

LCD J

OYSTICK

RN

ET

LCD A

DV

ANCED

J

OYSTICK

IMPORTANT!

The following section covers instructions for basic seating system controls through the

joystick/remote.  Please be certain to read the 

RNET Remote /Joystick Manual

(provided separately)

for additional safety, operating and troubleshooting instructions 

.  

speed control display

speed control display

Summary of Contents for MPS MAXX MPSS

























































































Reviews:

No comments