1.4 System
Identification
Motion Concepts power positioning systems are identified by a unique device identification (UDI) code and
serial number, which allows us to trace the production history of the system and better equips us to address
any service issues that may occur over the lifetime of the product.
The identification plate for your
Modular Power Standing System (MPS-Maxx)
is located on the inner base
plate of the anterior tilt module (in the left rear corner of MPS System)- see
Fig.1
.
- 7 -
Fig. 1
REAR
Maxx
Seat Frame
xx-xxx-xxxx-xxxx
System Serial No.
UDI Code
Limitations and Exclusions
The foregoing warranty shall apply only to the original purchase and shall not apply to product subjected to
neglect, abuse, improper operation, accidental damage or improper storage. The warranty shall not apply
to products which have been modified or fitted with improper parts or components without the written consent
of Motion Concepts. The warranty shall also not apply to a product which has been damaged as a result of
unauthorized repairs and/or by circumstances not under the control of Motion Concepts.
The foregoing is exclusive and in lieu of all other warranties, expressed or implied, including, without limitation,
implied warranties of merchantability and fitness for a particular purpose. The warranty shall not be extended
beyond the duration of the expressed warranty provided herein. Motion Concepts shall not be liable for
any consequential or incidental damages whatsoever.
Some jurisdictions do not allow the exclusions or limitation of incidental or consequential damages, or limitation
on the length of an implied warranty. Local laws should be reviewed to determine if the above exclusions and
limitations apply.
(Stander Seat
Module
1.0
1.0
INTRODUCTION
INTRODUCTION