User Reference Guide
SST-PB3-REM
58
Software Features
©2014 Molex Inc.
Document Edition: 1.1.4.0, Document #: 715-0106 Template Edition: 1.1, Template #: QMS-06-045
Use, duplication or disclosure of this document or any of the information contained herein is subject to the restrictions on page ii of this document.
22.
Repeat steps 10-21 for each slave device on the network.
23.
To set the parameters for the network, right-click on the highest level of the Network
view (default is Profibus_DP) and choose Properties from the shortcut menu. The
Network window will now be displayed, allowing the Baud Rate and other parameters to
be set. To edit Timing and other miscellaneous parameters choose either the Timing or
Parameters tabs.
24.
Configure the following parameters according to the Profibus network.
•
Name
- Name of the network.
•
Description
- Description of the network.
•
Baud Rate
- Baud rate of the Profibus network.
•
Highest Station
- Highest allowed station address for any active station on the
network. The highest station affects how much time is spent soliciting for new
nodes.
•
Options
- These affect the network parameters that the Configuration Tool
assigns:
FMS Devices
- indicates whether or not there are any FMS devices on the
network.
Stay Offline on Error
- indicates whether or not the SST-PB3-REM stays
offline when Token Error Limit or Response Error Limit is exceeded
within 256 token cycles.
25.
Once the parameters have been set, select OK to save the new settings.
26.
To save the configuration file select File>Save or Save As.
27.
Specify a filename and location for the configuration and select Save. This will save the
project as a .pbc file.
