User Reference Guide
SST-PB3-REM
148
Configuring and Programming the DP Master
©2014 Molex Inc.
Document Edition: 1.1.4.0, Document #: 715-0106, Template Edition: 1.1, Template #: QMS-06-045
Use, duplication or disclosure of this document or any of the information contained herein is subject to the restrictions on page ii of this document.
7.
Enter Name for tag and hit OK. The value of this tag must be updated with the I/O CRC
value this is created for the Profibus configuration in the SST™ Profibus Configuration
Tool. Double-click on SST-PB3-REM Master in your configuration and go to Parameters
tab and the I/O CRC value will be in right bottom corner as in screenshot below.
8.
Create a new tag for the Is_CRC_Ok parameter by right-clicking on right side of the
