Mocom B Classic-28, Operating Instructions Manual, Page: 7 / 97

2
Important notes
NOTE
The manual InFoRmaTIon aRe SubjeCT To ChanGeS WIThouT any
noTICe.
The manuFaCTuReR IS noT ReSponSIble FoR dIReCT, IndIReCT oR
aCCIdenTal damaGe ReSulTInG FRom oR RelaTInG To The pRoVI-
SIon oR uSe oF ThIS InFoRmaTIon.
ThIS doCumenT may noT be RepRoduCed, adapTed oR TRanSla-
Ted, In paRT oR In Full, WIThouT The pRIoR WRITTen peRmISSIon
oF The manuFaCTuReR.
PURPOSE OF
THE MANUAL
The purpose of this manual is to provide instructions for:
– becoming generally familiar with the product;
– its correct installation and configuration;
– its safe, efficient use;
– handling materials before and after sterilization.
Its appendIxs also provide:
– the product's general technical specifications;
– sterilization program specifications;
– maintenance;
– troubleshooting;
– a variety of other documentation.
When using this product, always follow the instructions in the manual and never use for anything
other than its intended purpose.
WARNING
The uSeR IS ReSponSIble FoR all leGal RequIRemenTS RelaTed
To The InSTallaTIon and uSe oF ThIS pRoduCT. The manuFaCTu-
ReR WIll noT be ReSponSIble FoR any bReakaGe, malFunCTIonS,
pRopeRTy damaGe oR InjuRy In The eVenT ThaT The pRoduCT IS
noT InSTalled oR uSed CoRReCTly.
Please observe the following precautions in order to avoid injury or property damage:
– use ONLY high-quality demineralised and/or distilled water.
WARNING
The uSe oF WaTeR oF InadequaTe qualITy Can SeVeRely damaGe
The deVICe.
See appendIx TeChnICal ChaRaCTeRISTICS In ThIS ReGaRd.
– Do not pour water or other liquids on the device;
– Do not pour inflammable substances on the device;
– Do not use the device in the presence of gas or explosive or inflammable vapors;
– before performing any maintenance or cleaning, ALWAYS DISCONNECT the electricity.
DANGER
WheneVeR IT IS noT poSSIble To dISConneCT The eleCTRICITy To
The deVICe, oR IF The exTeRnal poWeR GRId SWITCh IS FaR aWay
oR, aT any RaTe, noT VISIble To The maInTaIneR, plaCe a WoRk In
pRoGReSS SIGn on The exTeRnal poWeR GRId SWITCh aFTeR TuR-
nInG IT oFF.
– make sure the electrical system is grounded conforming to current laws and/or standards;
–
Do not
remove any label or nameplate from the device; request new ones, if necessary.
– use only original replacement parts.
WARNING
The FaIluRe To obSeRVe The aboVe, ReleaSeS The manuFaCTu-
ReR FRom all lIabIlITy.
GENERAL
WARNINGS