Mobeye argos i200, User Manual

Page: 8 / 27

7
4. INTRUDER ALARM: BASIC FUNCTIONS
The Mobeye Argos settings can be changed via the keypad. First the method of programming is discussed, next the
explanation of the settings.
This chapter describes the settings for the
‘all-in-one’ basic system. Advanced options like using the external inputs,
outputs, or external power supply can be found in chapter 7 and further.
4.1 CONFIGURATION
To change the settings, please follow these instructions:

Enter your 4-digit code
(factory setting is “1111”)

Press “menu” - light turns green

Enter the menu number (see list below)

Press “OK”

Enter the new setting

Press “OK”. The light switches off, a confirmation melody is played
In the event of an incorrect entry, the light turns red and a short beep sounds. The
menu can be left from any position, by twice pressing “OK”.
Following settings are possible:
Menu nr. Description Options Factory settings
00 Installation code 4-digit code 1111
101
102
103
104
105 1
st
tel. number
2
nd
tel. number
3
rd
tel. number
4
th
tel. number
5
th
tel. number
Tel. number
(0 to delete)
-
03 Sensitivity PIR 1(high), 2 (low) 1 (high)
04 Entry delay 1, 15, 30, 45 or 60 15
05 Interval test message 0-30 (days) 0
(no message)
07 Entry indication 0 (off), 1 (beep on), 2
(LED on) 0 (off)
08 Siren 0 (off), 1 (on) 0 (off)
09 Exit indication 0 (off), 1 (on) 1 (on)
12 SMS on/off 0 (off), 1 (on) 1 (on)
13 Call on/off 0 (off), 1 (on) 1 (on)
50 User code 4-digit 8888
60 Actual time hhmm (e.g.1530)
61 Actual date yyyymmdd
(e.g. 20140331)
62 Automatic arming time hhmm
(0 to delete)
0
(empty)
63 Automatic disarming time hhmm
(0 to delete)
0
(empty)
79 Inactive time PIR 00..60 (min.) 5
The menu can be left from any position, by twice pressing “OK”.
4.2 INSTALLATION CODE
The installation code is the 4-digit code for switching on/off and programming the settings or activating the special
functions. Factory default is “1111”. It is possible to change the code to any 4-digit number. Please change the code
to make the unit more secure.
4.3 USER CODE
The Mobeye Argos offers the possibility to set a personal 4-digit user code, for just arming and disarming the
system. It is not possible to change the settings with the user code. The system needs to be switched on and off
using the same code; the installation code and user code are not interchangeable. Factory settings for the user
code is
“8888”. This code can be changed by the installation code or user code (menu number 50). We recommend
that you change this code to make the unit more secure.