11
6. ADVANCED OPTIONS
6.1 REQUEST THE LIST OF SETTINGS
The settings can be sent to the set telephone number as SMS text message. In this way you also check the correct
working of the SIM card.
Enter the 4 digit installation c
ode (factory setting: “1111”)
Press “menu”
Enter “10”
Press “OK”
Within ca. 30 seconds the programmed phone number will receive the list of settings.
The advanced settings are listed in the ‘advanced setting list’:
Enter your 4 digit installation code (
factory setting: “1111”)
Press “menu”
Enter “11”
Press “OK”
Within ca. 30 seconds the programmed phone number will receive the list with advanced settings.
6.2 RESET TO FACTORY SETTINGS
It is possible to reset the Mobeye Argos to factory settings.
Enter your 4 digit installation
code (factory setting: “1111”)
Press “menu”
Enter “99”
Press “OK”
After several seconds a short confirmation tone is heard. The installation code is also reset to 1111.
6.3 LEAVE THE MENU
The menu can be left from any position, by twic
e pressing “OK”.
6.4 POSITION OF MOBEYE ARGOS
The built-in motion sensor has a 360º detection pattern and has a range of about
8 meters. The Mobeye Argos
can be positioned both vertically as horizontally. It
can be mounted to the wall, put down on its side in a cabinet, put down with its
sensor upward or downward. In case you wish to hang the Mobeye Argos, the
pre-punched holes can be opened, in order to hang it on screws.
In order to check the positioning of the sensor, a sensor test can be executed.
Enter the installation code
Press “menu”
Press “511”
Press “OK”
A confirmation beep is heard. First the green light will be flashing. After about 30 seconds the light will be on
continuously.
In this mode the sensor test can be done; each time the sensor detects a movement, a repeating beep will sound.
Leave the test by entering OK twice.
6.5 TEST GSM NETWORK STRENGTH
Before using the Mobeye Argos is it advised to test the GSM signal strength at the location.
Enter the installation code
Press “menu”
Press “512”
Press “OK”
The Mobeye Argos now switches on the GSM module and searches for all available networks. It also checks the
network strength of the SIM card provider in the device.
As soon as the GSM network is found, the light will turn green.
