4
1. INTRODUCTION
The Mobeye Argos is an easy to install alarm system that will notify you about an
activation using the built-in GSM communication module.
To use the Mobeye Argos you will need a SIM-card from any network.
Typical applications are the security of places without any power supply or the temporary
security of properties.
The Mobeye Argos has the following features:
Alarm notifications after movement detection
In case of the detection of an intruder, the Mobeye Argos will send an SMS text message to your phone(s). The
Mobeye Argos will also call the phone numbers in order to be sure the message is not missed. It is also possible to
set on the siren sound. After an alarm the Mobeye will be in standby status for about 5 minutes. Following the
standby period, the Mobeye will resume alerting you to new movement.
Alarm notifications after detection of out of range temperature
It is possible to program a minimum and/or maximum temperature alert in to the Mobeye Argos. The system will
monitor the actual temperature of its environment and send an alert as soon as the temperature reaches the limit.
Battery operated or using the mains
Although the Mobeye Argos is designed to run on batteries, it is possible to use an external power supply. When
powering the Mobeye Argos with mains, it notifies the first set telephone number if the power fails and that it has
switched to battery backup. It is also possible to remotely control the system when using mains power.
Connecting external sensors and devices
In addition to the integrated movement sensor and temperature sensor, external sensors can be connected. The
Mobeye Argos can also switch external devices connected to it via the outputs when an event triggers it (like an
alarm or incoming call).
Private numbers or Mobeye Internet Portal
The Mobeye Argos sends alarm messages to a maximum of five telephone numbers. As an option the Mobeye
Argos can be connected to the Mobeye Internet Portal, which is explained in chapter 11.
Low battery message
The Mobeye Argos will send an SMS text message when the batteries need to be replaced. When receiving this
message, you need to change the batteries as soon as possible, although the Mobeye Argos remains functioning
for a short time following the message. Even when the Mobeye Argos is unset, it will measure the battery strength
and send the message.
