© MOBATIME
32 / 84
800847.08
Configuration of the individual server/peer address is as follows:
Path: 2 Configuration
2 Time handling
4 NTP server configuration
1-4 Configuration
timeserver address x
1.
Insert time sources (IP address or name,
e.g. “ntp.metas.ch”)
ENTER without entry of an address will delete value.
2.-3. Configurations of
Minpoll
and
Maxpoll
: Inquiry interval 2^
poll value
in seconds.
0 = automatically
e.g. poll value=3
intervall 3: 2
3
= 8sec., poll value=5
intervall 5: 2
5
= 32sec.
Range of poll values (exponent): 1
– 16
To get an
exact synchronization it’s better to limit Maxpoll to 6 (64 sec.).
4.
Set type of inquiry: server or peer
5.
Preferred source: on or off
6.
Authentication key: off, key number, autokey
Notice:
If a key number is entered at point 6, the entered key must also be added
to the trusted keys.
Notice:
All changes lead to a restart of the NTP server!
Notice:
If NTP only runs as a backup (source DCF or GNSS), no NTP source
should be indicated as
prefer
!
Notice:
Maxpoll should not be selected below 4 (16 sec), as otherwise, internal
trimmung may be inaccurate.
Maxpoll and Minpoll on automatic can lead to insufficient synchronization
accuracy. The specified accuracies were measured with Minpoll = 3 and
Maxpoll = 6.
The configuration server should be used whenever possible.
DTS 4128.timeserver Moser-Baer AG
====================================
ENTRY TIMESOURCE 1
1 Source 10.241.17.1
2 Minpoll 3
3 Maxpoll 5
4 Server/Peer server
5 Prefer no
6 Authentication key off
98 Return and save
99 Return and discard changes
Enter desired menu number>
