© MOBATIME
55 / 84
800847.08
3. Change to the directory
/ram
.
4. Copy the image into the directory
/ram
.
5. Close FTP connection.
6. The update procedure can be started on the DTS 4128 by selecting the menu '3.
Maintenance'
’1. Update Software’ and press ENTER. The message "Update in
progress" appears and at the same time, “Please wait!>“ is shown in the command
line. All files are copied. The DTS 4128 is automatically restarted on completion of
the update.
The telnet or SSH session has to be restarted.
Caution:
The update procedure (point 6) may take longer time depending on the
type and number of images (<5 min) and must not be interrupted under
any circumstances. If interrupted, the software on the DTS 4128 will be
destroyed and it has to be returned to the manufacturer for repairing.
Important:
Only for DTS 4128 V1 devices:
With this update procedure
the whole configuration of the DTS is lost
.
Therefore after the update the current IP address (set from DHCP) has to
be read again via a serial connection, before via FTP the earlier saved file
dts4128.conf/ dtsdevice.conf
can be copied back (see procedure in
chapter 7.4).
7.4
Updating configurations
To update the configuration on the DTS 4128 the following procedure has to be used.
all file names must be written in small letters.
1. Connect a FTP client software to the DTS 4128 (e.g. with Internet Explorer enter:
ftp://dts@[IP address])
(as user dts).
2. Change to the directory
/ram
.
3. Copy all the files to be updated into the directory
/ram
.
4. Close FTP-Connection.
5. The update procedure can be started on DTS 4128 by selecting the menu '3. Mainte-
nance'
’1. Update Software’ and press ENTER. The message "Update in
progress" appears and at the same t
ime, “Please wait!>“ is shown in the command
line. All files are copied. The DTS 4128 is automatically restarted on completion of
the update.
The telnet or SSH session has to be restarted.
Caution:
The copy procedure (point 5) may take longer depending on the type and
number of images (<5 min) and must not be interrupted under any
circumstances. If interrupted, the software on the DTS 4128 will be
destroyed and it has to be returned to the manufacturer for repairing.
!
!
