© MOBATIME
14 / 84
800847.08
5
Installation
5.1
Connections
The connections are specified in Appendix "A Connection diagrams".
Only connect the designated devices to the various inputs and outputs.
5.2
Boot procedure of the DTS 4128.timeserver
The normal booting time of the DTS 4128 is approx. 20 sec. with pre-set IP or with
DHCP. The booting procedure of the operating system is displayed on the serial
console. After that, the ’sync’ control lamp is switched off and only switched on again
when time is received from the time source. Without any connection to a DHCP server,
the first start up can take up to 30 seconds. Afterwards, the DHCP option must be set
to "off" in the network settings.
5.3
Firmware
It is recommended to install the current firmware on your device prior to the definite
commissioning. The current firmware can be found under
www.mobatime.com
Customer Data
Product Ressources
Time Server
.
