© MOBATIME
31 / 84
800847.08
6.5.8
NTP server
NTP can run as server or combined as server/client. To run NTP as source (NTP as
client), in the menu
’2. Configuration’
’2. Time handling’
’1. Time source setting'
’1. Source type' choose NTP and set at least one server. If NTP server is
configured, but NTP is not indicated as time source, NTP only runs as backup time
source (redundancy) to the actual time source.
The exact behavior of NTP time sources is described in chapter "8.3 Time acceptance
from NTP".
Further two multicast or broadcast addresses can be configured.
Path: 2 Configuration
2 Time handling
4 NTP server configuration
1.-4.
Summary about configured NTP
– time sources. Select to configure.
5.-6.
Summary about configured NTP
– broadcast addresses. Select to configure.
7.
NTP Authentication:
Changes to the menu “NTP AUTHENTICATION"
Information about a multicast
– address, configured for NTP slave clocks.
DTS 4128.timeserver Moser-Baer AG
====================================
NTP SERVER CONFIGURATION
1 Configuration timeserver address 1 10.241.17.1
2 Configuration timeserver address 2 ntp.test.org
3 Configuration timeserver address 3
4 Configuration timeserver address 4
5 Configuration multi-/broadcast address 1
6 Configuration multi-/broadcast address 2
7 NTP Authentication
NTP slave clock line (info only)
99 Return
Enter desired menu number>
