IS-120B
1. Special Precautions
1-3
Apply the specified source voltage.
Application of a voltage out of the specified range can cause fire and electric
shock.
Do not splash water on the equipment.
Water splashed over the electric parts, can cause electric shock and short
circuits.
Use proper tools (wire strippers, pressure wire connectors, etc.) for
termination of the connecting cables.
Do not cut the conductor of wire. A flaw on it can cause fire and electric
shock.
Install the equipment on firm and level surface.
If the equipment falls or drops, injury may result.
Do not sit on, do not put things on it.
Sitting on it, or putting things on it may cause malfunction.
Keep combustible matter away from the welding machine.
Surface flash and expulsion can ignite combustible matter. If it is
impossible to remove all combustible matter, cover them with
non-combustible material.
Do not cover this equipment with a blanket, cloth, etc.
If such a cover is used, it may be heated and burn.
Do not use this Power Supply for purposes other than welding.
Use of this equipment in a manner other than specified can cause electric
shock and fire.
Use ear protectors.
Loud noises can damage hearing.
Keep a fire extinguisher nearby.
Keep a fire extinguisher in the welding shop in the case of fire.
Maintain and inspect the equipment periodically.
Maintain and inspect the equipment periodically, and repair any damage
nearby before starting operation.
CAUTION
!
!
!
!
!
!
!
!
