3-69
Emergency stop input and output etc.
3 Controller
(3) Automatic Operation/Jog Operation/Brake Release and Necessary Switch Settings
The following is a description of various operations performed on the robot and switch settings that are required.
Table 3-7 : Various operations and necessary switch settings
Fig.3-23 : Brake release operation
No
Operation
Related switch settings
Note1)
Note1) "-" in the table indicates that the state of switch concerned does not matter.
Description
Mode of
controller
T/B
enable/
disable
T/B
enable switch
Enabling
device input
terminal
Door switch
input terminal
1
Jog operation
Manual
Enable
ON
Close(ON)
-
If the enabling device input is set to
Close (On), the state of door switch
input does not matter.
2
Jog operation
Note2)
Note2) Jog operation, if door switch input is set for Close (Door Close), must be performed outside the safety bar
-
rier.
Manual
Enable
ON
Open(OFF)
Close
(Door Close)
If the enabling device input is set to
Open (Off), door switch input must be
in a state of Close
3
Brake release
Note3)
Note3) It is imperative that brake release operation be carried out by two persons. One person turns on the
enabling device ("Close" on the enabling device input terminal) while the other manipulates the T/B. Brake
release can be effected only when both of the enabling switch device and the T/B enable switch are placed
in intermediate position (lightly gripped position). At this point, the state of door switch input does not mat
-
ter.
Manual
Enable
ON
Close(ON)
-
Irrespective of the state of door
switch input, enabling device input
must be in a state of Close (On).
4
Automatic
operation
Automatic
Disable
-
-
Close
(Door Close)
Door switch input must always be in a
state of Close (Door Close).
Door in
Open state
Upon the release of brake, the
robot arm may fall under its own
weight depending on the axis
which has been released. For
added safety, provide support or
take other precaution to prevent
the falling of the arm.
CAUTION
T/B being manipulated
Enabling device being manipulated
Summary of Contents for MELFA CR1QA-700
