78
Appendices
Connecting HD MI Devices to the TV
When setting up CEC control:
Enable the TV’s NetCommand HDMI control as
•
described above. NetCommand for HDMI is off by
default.
Connect and set up HDMI devices one at a time.
•
First turn on the device and allow the power-
•
on sequence (boot up) to complete. Stop any
playback, and then connect the HDMI cable as
described next.
Turn on the device and allow it to complete the
1.
power-on sequence (boot up).
Connect the device to one of the TV’s HDMI inputs.
2.
When the TV detects the connection, the
Auto
Input Sensing
screen will appear and provide addi-
tional instructions. You will see one of the following
screens, depending on your equipment.
Figure 2 (TV recognizes the CEC device).
•
The TV’s NetCommand HDMI Control is on and
the device’s CEC capability is on. This screen
confirms the device is CEC compatible by
showing the name provided by CEC. The screen
shown in fi gure 3 may display fi rst before fi gure
2 appears.
Figure 2. TV recognizes the CEC device. The TV’s
NetCommand for HDMI is on and the connected
device’s HDMI Control is also on.
Many new HDMI devices have a feature called CEC
(Consumer Electronics Control) or HDMI Control.
Mitsubishi calls this feature NetCommand HDMI Control
or NetCommand for HDMI. HDMI CEC allows one
device, such as the TV, to control other devices, such
as an A/V receiver or disc player. CEC use is optional.
Each manufacturer chooses which CEC functions to
support so it is difficult to predict which devices and
features are compatible with Mitsubishi’s NetCommand
for HDMI. You may find that CEC functions for a specific
device are limited.
To use CEC, you must enable operation in all three
of the following:
The TV’s Inputs > NetCommand HDMI Control
•
menu.
You must turn on the TV’s NetCommand HDMI
Control in order for CEC to operate. When off, the TV
sends no control signals to CEC devices.
The TV’s Inputs > Name menu.
•
You can turn
on or off the TV’s control signals to individual
CEC devices. This option operates only when
NetCommand HDMI Control is enabled.
The device setup menus.
•
Most devices with HDMI
CEC compatibility let you turn it on or off in the device
menus, where it is typically listed as “HDMI Control.”
Enabling or Disabling the TV’s
Net Command HDMI Control
Press
1.
MENU
to display the TV
Main
menu.
Highlight
2.
Inputs
using .
Press
3.
and then to select
NetCommand HDMI
Control
and open the menu shown in figure 1.
Use
4.
to turn NetCommand HDMI Control
On
or
Off;
Off
shuts off all NetCommand for HDMI
signals.
Figure 1. The TV menu Inputs > NetCommand HDMI
Control lets you set HDMI control either on or off.
Appendix D: NetCommand HDMI Control of CEC Devices
Summary of Contents for LaserVue L65-A90
Page 1: ...MODEL L65 A90 Owner s Guide...
Page 2: ......
Page 70: ...70 Appendices This page intentionally left blank...
Page 95: ......