Mitsubishi LaserVue L65-A90, Owner'S Manual

Page: 63 / 96

6. NetCommand IR Control
63
ceiver menu are arbitrary names used by the TV
to uniquely identify A/V receiver inputs.
Audio Switching Setup 1: Automatic A/V Rec eiver
Switching to the TV Audio Input
Most devices are set up to use the TV’s audio output like
the VCR in this example; analog audio from the device is
sent through the TV to the A/V receiver’s TV audio input.
Use this setup for:
Sources providing only analog stereo output, •
such as a VCR.
Audio from
• ANT 1 and ANT 2
Under
1.
Learn , highlight Input1 .
In this example, the IR code for the A/V receiver’s
TV Audio input will be “learned” as Input 1 .
Press
2.
ENTER on the TV’s remote control.
While the text
3.
Input1 is flashing, press and hold the
TV INPUT key on the A/V receiver’s remote control.
When a check appears next to
4.
Input 1 , release the
TV INPUT key.
If the text stops flashing before the check mark •
appears, repeat this step.
To erase the IR code just “learned,” press
• CANCEL
while the name is highlighted.
Press
5.
once to highlight TV Audio (TV audio
output) in the Assign Input1 column. The triangular
marker is always next to the assigned sound source.
Press
6.
EXIT if finished or continue with setup for
another TV audio source.
Completed Net Command setup described for
controlling A/V receiver switching to the A/V receiver’s
audio input from the TV’s
AUDIO OUTPUT.
Setting Up Net Command IR Control of an A/V Receiver, continued
IMPORTANT
All audio from what you are watching on the TV is
always available from both the TV’s AVR AUDIO
OUTPUT and DIGITAL AUDIO OUTPUT jacks.
To use the digital surround sound capabilities
of your A/V receiver however, you must connect
your DVD player, satellite receiver, or cable box
directly to the A/V receiver, as surround sound
may not be available from the TV’s audio output.
Before You Begin
Connect your A/V devices to the TV and connect
1.
your A/V receiver to the audio outputs on the TV and
the DVD player. See chapter 3, “TV Connections,” for
suggestions.
Important: To use Setup 1, you must:
Connect the A/V receiver to the TV’s audio •
output; i.e., the TV’s AVR AUDIO OUTPUT or
DIGITAL AUDIO OUTPUT jack.
Set the • AV > Audio menu Speakers option to
AV Receiver .
Position Net Command IR emitters as described in
2.
“IR Emitter Placement,” page 56 .
Open the
3.
Inputs > AV Receiver menu.
Note: The terms Input1 – Input5 used in the AV Re-
A
C
D
B
AV Receiver menu to set up audio switching
A
The Learn column lists “learnable” input keys on
the A/V receiver’s remote control.
B
A check mark next to a key name indicates it has
been “learned” by Net Command.
C
Input1 through Input5 are arbitrary names the
TV uses to uniquely identify A/V receiver inputs.
D
After “learning” IR codes for A/V receiver inputs,
use the Assign Input column to identify the device
connected to the TV and the associated A/V
receiver input.
For the given example:
Connect the TV’s audio output to the A/V receiver’s 1.
TV audio input.
Using this screen, “learn” the IR code for the A/V
2.
receiver’s TV audio input as Input1 (item C above).
In the 3. Assign Input1 column (item D above), assign
the name TV Audio (the default) to the A/V receiver
IR code previously learned as Input1 .
Connect the DVD player’s audio output to the A/V 4.
receiver’s DVD input.
Using this screen, “learn” the IR code for the A/V
5.
receiver’s DVD audio input as Input2 .
In the 6. Assign Input2 column, assign the name DVD
to the A/V receiver IR code previously learned as
Input2 in this screen.