EN-32
NETWORK menu
WIRELESS SETTING
NETWORK
PASSWORD
NETWORK
NETWORK
CERTIFICATION
PROJECTOR NAME
IP CONFIG
NETWORK RESET
opt.
ENTER
ENTER
ENTER
OFF
AMX DEVICE
DISCOVERY
NETWORK RESTART
OK
OK
ON
NETWORK
WIRELESS SETTING
opt.
SSID
SAVE SETTINGS
AUTO
OFF
OK
CHANNEL
ENCRYPTION
SSID
CH.
NETWORK
IP CONFIG
opt.
DHCP
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
192. 168. 1. 10
MAC ADDRESS
SAVE SETTINGS
OFF
ON
255. 255. 255. 0
192. 168. 1. 11
192. 168. 1. 254
OK
DHCP FUNCTION
START IP ADDRESS
END IP ADDRESS
192. 168. 1. 10
MITSUBISHI Proje...
ITEM
SETTING
FUNCTION
PROJECTOR NAME
*****...
Set the name to identify the projector. Enter up to 15 characters
(alphabets or numeric characters). (See page 40.)
NETWORK CERTIFICATION
ON / OFF
Select whether to enable the network certifi cation or not. Select ON
for normal use. (See page 40.)
NETWORK PASSWORD
ENTER
Set the password for the certifi cation of PJLink™, ProjectorView
and remote control via LAN. (See page 40.)
IP CONFIG
ENTER
Select this setting for IP Confi guration. (See page 41.)
DHCP
ON
Select this setting when you obtain IP CONFIG automatically by
DHCP server.
OFF
Select this setting when you set IP CONFIG manually.
IP
ADDRESS
***.***.***.***
Press the ENTER button to set IP ADDRESS. When DHCP is set to
ON, you cannot change this setting.
SUBNET
MASK
***.***.***.***
Press the ENTER button to set SUBNET MASK. When DHCP is set to
ON, you cannot change this setting.
DEFAULT
GATEWAY
***.***.***.***
Press the ENTER button to set DEFAULT GATEWAY. When DHCP is
set to ON, you cannot change this setting.
MAC ADDRESS
xx-xx-xx-xx-xx-xx
Displays MAC ADDRESS.
DHCP
FUNCTION
ON / OFF
Use this setting when using the projector as a DHCP server.
START IP ADDRESS
***.***.***.***
Press the ENTER button to set START IP ADDRESS. When DHCP is
set to ON or DHCP FUNCTION is set to OFF, you cannot change this
setting.
END IP ADDRESS
***.***.***.***
Press the ENTER button to set END IP ADDRESS. When DHCP is
set to ON or DHCP FUNCTION is set to OFF, you cannot change this
setting.
SAVE
SETTINGS
OK
Saves the IP CONFIG settings. When the IP CONFIG is not changed,
you cannot select SAVE SETTINGS.
WIRELESS SETTING
ENTER
Select this setting for wireless configuration. (See page 44.)
SSID
********...
Set SSID. Enter up to 32 character alphabets (capital/small), numeric
characters, or marks.
CHANNEL
AUTO / 1 / 2 / 3 / 4 / 5
/ 6 / 7 / 8 / 9 / 10 / 11
Select the wireless channel.
ENCRYPTION
OFF /
WEP 128bit(ASCII) /
WEP 64bit(ASCII) /
WEP 128bit(HEX) /
WEP 64bit(HEX) /
WPA-PSK(ASCII) /
WPA2-PSK(ASCII) /
WPA-PSK(HEX) /
WPA2-PSK(HEX)
Select the wireless encrypted communication.
SAVE
SETTINGS
OK
Saves the WIRELESS SETTING settings. When the WIRELESS
SETTING is not changed, you cannot select SAVE SETTINGS.
AMX DEVICE DISCOVERY
OFF / ON
Use this setting when using an AMX controller.
NETWORK RESET
OK
Resets the Network Setting. (See page 45.)
NETWORK RESTART
OK
Press the ENTER button to restart the network function.
Menu operation (continued)
