9
9-33
Rev.1.0
9.2.7 DMA Interrupt Request Status Registers
■
DMA0-4 Interrupt Request Status Register (DM04ITST)
<Address: H'0080 0400>
D0
1
2
3
4
5
6
D7
DMITST4 DMITST3 DMITST2 DMITST1 DMITST0
<When reset: H'00>
D
Bit Name
Function
R
W
0-2
No functions assigned
0
–
3
DMITST4
0: No interrupt requested
(DMA4 interrupt request status)
1: Interrupt requested
4
DMITST3
(DMA3 interrupt request status)
5
DMITST2
(DMA2 interrupt request status)
6
DMITST1
(DMA1 interrupt request status)
7
DMITST0
(DMA0 interrupt request status)
W= : Only writing 0 is effective. Writing 1 has no effect, the bit retains the value it had before writing.
The DMA0-4 Interrupt Request Status Register helps to know the status of interrupt requests on
DMA channels 0-4. If the DMAn interrupt request status bit (n = 0-4) is set to 1, it means that the
channel has a DMA interrupt request generated.
DMITSTn (DMAn interrupt request status) bit (n = 0-4)
The DMAn interrupt request status bit is set in hardware, and cannot be set in software.
The DMAn interrupt request status bit is cleared by writing 0 in software.
Note: The DMAn interrupt request status bit is not cleared by writing 0 to the DMA Interrupt
Control Register "interrupt request bit" of the Interrupt Controller.
When writing to the DMA0-4 Interrupt Request Status Register, be sure to write 0 for the bits to be
cleared and 1 for all other bits. Writing 1 in software does not affect any bit of this register, the bit
retains the value it had before writing.
DMAC
9.2 DMAC Related Registers
Summary of Contents for 32172
