manualshive.com logo in svg

Mitsubishi MOTORS ATTRAGE, Manual

The Mitsubishi MOTORS ATTRAGE is a sleek and compact sedan that combines style, performance, and efficiency. Discover the full potential of this remarkable vehicle by downloading its user manual for free from our website. Obtain valuable insights and tips to optimize your driving experience with ease and convenience.

Share
Download
background image

Tyre repair kit

For emergencies

8-7

8

E00804601244

Before repairing a tyre, first stop your vehicle
in a safe, flat location. 

1. Park the vehicle on level and stable

ground.

2. Set the parking brake firmly.
3. Move the selector lever to the “P”

(PARK) position and stop the engine.

How to use the tyre repair kit 

WARNING

Using the tyre repair kit may damage the
wheel.
The vehicle must promptly be inspected
and repaired by an authorised MITSUBI-
SHI MOTORS dealer after using the tyre
repair kit.

CAUTION

The tyre sealant can cause health damage if
swallowed. If you accidentally swallow it,
drink as much water as possible and immedi-
ately have yourself examined by a doctor.

If the tyre sealant gets in your eyes or on
your skin, rinse it away with lots of water. If
you still sense an abnormality, have yourself
examined by a doctor.

Consult a doctor immediately if any allergic
reactions occur.

Be careful not to allow children to touch the
tyre sealant.

Do not breathe in the vapours of tyre sealant.

Be sure to use a MITSUBISHI MOTORS
GENUINE tyre sealant.

NOTE

The tyre sealant cannot be used in any of the
situations listed below. If any of these situa-
tions occurs, please contact an authorised
MITSUBISHI MOTORS dealer or another
specialist.
• The tyre sealant’s expiry date has passed.

(The expiry date is shown on the bottle
label.)

• More than one tyre is punctured.
• The puncture hole has a length or width of

4 mm or more.

• The tyre is punctured in the side wall (A),

not in the tread (B).

• The vehicle has been driven with the tyre

almost completely flat.

• The tyre has completely slipped over the

wheel rim and come off the wheel.

• The wheel is damaged.

Use the tyre sealant only at ambient tempera-
tures of -30 °C to + 60 °C.

Effect an emergency repair without pulling
out the object (nail, screw, etc.) that is stuck
in the tyre.

Do not use the tyre sealant if the tyre has
been damaged by being driven when insuffi-
ciently inflated (e.g. bumps, cuts, cracks etc.
on the tyre).

Wipe tyre sealant off the paintwork immedi-
ately with a damp cloth.

Immediately wash clothes contaminated with
tyre sealant.

Check the tyre sealant's expiry date regu-
larly, and be sure to purchase a new one from
an authorised MITSUBISHI MOTORS
dealer before the expiry date.

NOTE

Summary of Contents for ATTRAGE































































































































































































































Reviews:

No comments

Related manuals for ATTRAGE

Westin 23-3130 Instructions preview
23-3130
Brand: Westin Pages: 3
Mobis G4211ADE00AL Installation Instructions Manual preview
G4211ADE00AL
Brand: Mobis Pages: 16
Subaru starlink Manual preview
starlink
Brand: Subaru Pages: 216
Monacor CARPOWER CAP-12XHQ Manual preview
CARPOWER CAP-12XHQ
Brand: Monacor Pages: 5
Jeep Grand Cherokee WK2 Owner'S Manual preview
Grand Cherokee WK2
Brand: Jeep Pages: 338
Whispbar K561W Fitting Instructions Manual preview
K561W
Brand: Whispbar Pages: 15
Havis-Shields 1997-2007 Dodge Dakota Telescoping Computer Base C-TCB-28 Install Instructions preview
1997-2007 Dodge Dakota Telescoping Computer Base C-TCB-28
Brand: Havis-Shields Pages: 3
UAZ UAZ-374195 Operating Manual preview
UAZ-374195
Brand: UAZ Pages: 90
Yakima Landing Pad 24 Quick Start Manual preview
Landing Pad 24
Brand: Yakima Pages: 11
Hyundai SANTA FE 2020 Getting Started Manual preview
SANTA FE 2020
Brand: Hyundai Pages: 19
Kargo Master 8006A Instruction Manual preview
8006A
Brand: Kargo Master Pages: 19
Safe Fleet PRIME DESIGN VBR3-FT31B Manual preview
PRIME DESIGN VBR3-FT31B
Brand: Safe Fleet Pages: 12
PEUGEOT 108 2017 Vehicle Instruction Card preview
108 2017
Brand: PEUGEOT Pages: 17
Whispbar K835W Fitting Instructions For Basic Carrier preview
K835W
Brand: Whispbar Pages: 63
Soundoff Signal nERGY ETSA200R-PA Quick Start Manual preview
nERGY ETSA200R-PA
Brand: Soundoff Signal Pages: 3
Truma Mover H SE User Manual preview
Mover H SE
Brand: Truma Pages: 10
Lincoln 2017 MKC Owner'S Manual preview
2017 MKC
Brand: Lincoln Pages: 538
Mitsubishi 3000gt 1999 Workshop Manual preview
3000gt 1999
Brand: Mitsubishi Pages: 57

Brands by name

Popular brands

Load more brands