Mitsubishi MOTORS ATTRAGE, Manual

Page: 47 / 222

Head restraints
4-4 Seat and seat belts
4
Adjust the head restraint height so that the
centre of the restraint is as close as possible to
ear level to reduce the chances of injury in the
event of collision. Any person too tall for the
restraint to reach their seated ear level, should
adjust the restraint as high as possible.
To raise the head restraint, move it upward.
To lower the restraint, move it downward
while pushing the height adjusting knob (A)
in the direction of the arrow. After adjust-
ment, push the head restraint downward and
make sure that it is locked.
Lift the head restraint with the height adjust-
ing knob (A) pushed in.
Confirm that the head restraint is facing the
correct direction, and then insert it into the
seatback while pressing the height adjusting
knob (A) in the direction indicated by the
arrow.
The head restraint stalk with the adjustment
notches (B) must be installed in the hole with
the adjusting knob (A).
To adjust height
To remove
To install
CAUTION
 Confirm that the height adjusting knob (A) is
correctly adjusted as shown in the illustra-
tion, and also lift the head restraints to
ensure that they do not come out of the seat-
back.
CAUTION
 The shape and size of the head restraint dif-
fers according to the seat. Always use the
correct head restraint provided for the seat
and do not install the head restraint in the
wrong direction.