Mitsubishi MOTORS ATTRAGE, Manual

Page: 43 / 222

Electric window control
3-20 Locking and unlocking
3
 The safety mechanism is deactivated while
the switch is pulled up. Therefore be espe-
cially careful that fingers are not trapped in
the door window opening.
NOTE
 The safety mechanism can be activated if the
driving conditions or other circumstances
cause the driver’s door window to be sub-
jected to a physical shock similar to that
caused by a trapped hand or head.
 If the safety mechanism is activated 5 or
more times in a row, the safety mechanism
will be cancelled and the door window will
not close correctly.
In such a case, the following procedure
should be implemented to rectify this situa-
tion.
If the window is open, repeatedly raise the
driver’s door window switch until that win-
dow has been fully closed. Following this,
release the switch, raise the switch once
again and hold it in this condition for at least
1 second, then release it. You should now be
able to operate in the normal fashion.
CAUTION
 If the battery terminals are disconnected or
the fuse for electric window is replaced, the
safety mechanism will be cancelled and the
door window will not automatically
open/close completely.
If the window is open, repeatedly raise the
driver’s door window switch until the win-
dow has been fully closed. Following this,
release the switch, raise the switch once
again and hold it in this condition for at least
1 second, then release it. You should now be
able to operate the driver’s door window in
the normal fashion.
NOTE