manualshive.com logo in svg

Mitsubishi MOTORS ATTRAGE, Manual

The Mitsubishi MOTORS ATTRAGE is a sleek and compact sedan that combines style, performance, and efficiency. Discover the full potential of this remarkable vehicle by downloading its user manual for free from our website. Obtain valuable insights and tips to optimize your driving experience with ease and convenience.

Share
Download
background image

Running-in recommendations

6-4

Starting and driving

6

not only because rearward vision will be
obstructed, but also the luggage may be pro-
jected into the passenger compartment under
hard braking.

E00600404559

During the running-in period for the first
1,000 km, it is advisable to drive your new
vehicle using the following precautions as a
guideline to aid long life as well as future
economy and performance.

Do not race the engine at high speeds.

Avoid rapid starting, accelerating, braking
and prolonged high-speed running.

Keep to the running-in speed limit shown
below.
Please note that the legal speed limits dis-
played must be adhered to.

Do not exceed loading limits.

Refrain from towing a trailer.

E00600501719

To park the vehicle, first bring it to a com-
plete stop, fully apply the parking brake suffi-
ciently to hold the vehicle.

Running-in recommenda-
tions 

Vehicles with M/T 

Shift point

Speed limit

1st gear

35 km/h

2nd gear

65 km/h

3rd gear

95 km/h

4th gear

110 km/h

5th gear

110 km/h

Vehicles with CVT 

Shift point

Speed limit

“D” (DRIVE)

100 km/h

Parking brake 

Shift point

Speed limit

To apply 

1- Firmly depress and hold the brake pedal,

then pull the lever up without pushing
the button at the end of hand grip.

CAUTION

When you intend to apply the parking brake,
firmly press the brake pedal to bring the
vehicle to a complete stop before pulling the
parking brake lever. Pulling the parking
brake lever with the vehicle moving could
make the rear wheels lock up, thereby mak-
ing the vehicle unstable. It could also make
the parking brake malfunction.

NOTE

Apply sufficient force to the parking brake
lever to hold the vehicle stationary after the
foot brake is released.

Summary of Contents for ATTRAGE































































































































































































































Reviews:

No comments

Related manuals for ATTRAGE

Daihatsu TERIOS J100 Maintenance Manual preview
TERIOS J100
Brand: Daihatsu Pages: 43
Wagan 2591 User Manual preview
2591
Brand: Wagan Pages: 12
LAS BC260 Operating Instructions Manual preview
BC260
Brand: LAS Pages: 44
LAS 11807 Operating Instructions Manual preview
11807
Brand: LAS Pages: 24
GATmatic TWC-562S Installation, Operation & Maintenance Manual preview
TWC-562S
Brand: GATmatic Pages: 13
Toyota 4Runner 2019 Quick Reference Manual preview
4Runner 2019
Brand: Toyota Pages: 52
RAM Ram Dodge 2010 Owner'S Manual preview
Ram Dodge 2010
Brand: RAM Pages: 616
Nav TV AUDI-P60H Install Manual preview
AUDI-P60H
Brand: Nav TV Pages: 9
Honda Clarity 2018 Owner'S Manual preview
Clarity 2018
Brand: Honda Pages: 81
EUFAB 16465 Operating Instructions Manual preview
16465
Brand: EUFAB Pages: 12
Sanitas SMG 245 Instructions For Use Manual preview
SMG 245
Brand: Sanitas Pages: 36
Power Acoustik METER 4 Installation preview
METER 4
Brand: Power Acoustik Pages: 4
Westfalia 859528 Original Instructions Manual preview
859528
Brand: Westfalia Pages: 10
Menabo YELO 4 NS Fitting Instructions Manual preview
YELO 4 NS
Brand: Menabo Pages: 8
Audiovox Prestige 128-8602 Installation Manual preview
Prestige 128-8602
Brand: Audiovox Pages: 8
Cadillac 2005 XLR Owner'S Manual preview
2005 XLR
Brand: Cadillac Pages: 438
Speedtech 64-67 Instructional Manual preview
64-67
Brand: Speedtech Pages: 12
Kargo Master 80070 Instruction Manual preview
80070
Brand: Kargo Master Pages: 17

Brands by name

Popular brands

Load more brands