Mitsubishi MOTORS 2018 MIRAGE, Owner'S Manual

Page: 52 / 354

To return
1. Confirm that the seat belt plate of the
outboard seating position is stored.
2. Raise the seatbacks until it locks secure-
ly into place.
Push lightly on the seatbacks to confirm
that it has actually been secured.
Head restraints
WARNING
l Driving without the head restraints in
place can cause you and your passengers
serious injury or death in an accident. To
reduce the risk of injury in an accident,
always make sure the head restraints are
installed and properly positioned when
the seat is occupied.
l Never place a cushion or similar device on
the seatback. This can adversely affect
head restraint performance by increasing
the distance between your head and the
restraint.
l When a person sits in the rear seat, pull
up the head restraint to a height at which
it locks in position. Be sure to make this
adjustment before starting to drive. Seri-
ous injuries could otherwise be suffered as
the result of an impact.
To adjust height
Adjust the head restraint height so that the
centre of the restraint is as close as possible
to ear level to reduce the chances of injury in
the event of collision. Any person too tall for
the restraint to reach their seated ear level,
should adjust the restraint as high as possible.
To raise the head restraint, move it upward.
To lower the restraint, move it downward
while pushing the height adjusting knob (A)
in the direction of the arrow. After adjust-
ment, push the head restraint downward and
make sure that it is locked.
To remove
Lift the head restraint with the height adjust-
ing knob (A) pushed in.
To install
Confirm that the head restraint is facing the
correct direction, and then insert it into the
seatback while pressing the height adjusting
knob (A) in the direction indicated by the ar-
row.
Head restraints
4-04
OA0X19E2
Seat and seat belts
4