Mitsubishi MOTORS 2018 MIRAGE, Owner'S Manual

Page: 265 / 354

Washer fluid
Open the washer fluid reservoir cap and
check the level of washer fluid.
If the level is low, replenish the container
with washer fluid.
Full level is approximately 5 cm below from
the upper surface of the reservoir.
Upper surface
Full
NOTE
l The washer fluid container serves the wind-
screen and rear window (if so equipped).
During cold weather
To ensure proper operation of the washers at
low temperatures, use a fluid containing an
anti-freezing agent.
Brake fluid
To check the fluid level
The fluid level must be between the “MAX”
and “MIN” marks on the reservoir.
LHD
RHD
The fluid level is monitored by a float. When
the fluid level falls below the “MIN” mark,
the brake fluid warning lamp lights up.
The fluid level falls slightly with wear of the
brake pads, but this does not indicate any ab-
normality.
If the fluid level falls markedly in a short
length of time, it indicates leaks from the
brake system.
If this occurs, we recommend you to have the
vehicle checked.
Fluid type
Use brake fluid conforming to DOT3 or
DOT4 from a sealed container. The brake flu-
id is hygroscopic. Too much moisture in the
brake fluid will adversely affect the brake
system, reducing the performance.
WARNING
l Take care in handling brake fluid as it is
harmful to the eyes, may irritate your
skin and will damage painted surfaces.
Wipe up spills immediately. If brake fluid
gets on your hands or in your eyes, flush
immediately with clean water. Follow up
with a doctor as necessary.
Washer fluid
10-07
OA0X19E2
Maintenance
10