Mitsubishi MOTORS 2018 MIRAGE, Owner'S Manual

Page: 33 / 354

Keyless operation key
1. Remove the emergency key from the
key.
Refer to “Emergency key” on page
3-11.
2. With the MITSUBISHI mark facing you,
insert the cloth-covered tip of a straight
blade (or minus) screwdriver into the
notch in the remote control switch case
and use it to open the case.
NOTE
l
Be sure to perform the procedure with the
MITSUBISHI mark facing you. If the
MITSUBISHI mark is not facing you when
you open the remote control switch case, the
transmitter may come out.
3. Remove the old battery.
4. Install a new battery with the + side (A)
up.
+ side
- side
Coin type battery
CR2032
5. Close the case firmly.
6. Install the emergency key removed in
step 1.
7. Check the keyless operation function to
see that it works.
Keyless operation system*
The keyless operation system allows you to
lock and unlock the doors and tailgate, start
the engine and change the operation mode
simply by carrying the keyless operation key
with you.
The keyless operation key can also be used as
the keyless entry system remote control
switch.
Refer to “Starting and stopping the engine”
on page 6-15.
Refer to “Keyless entry system” on page
3-04.
The driver should always carry the keyless
operation key. This key is necessary for lock-
ing and unlocking the doors and tailgate,
starting the engine and otherwise operating
the vehicle, so before locking and leaving the
vehicle, be sure to check that you have the
keyless operation key.
WARNING
l People with implantable cardiac pace-
makers or implantable cardiovascular-de-
fibrillators should not go near the exterior
transmitters (A) or the interior transmit-
ters (B). The radio waves used by the key-
less operation system could adversely af-
fect implantable cardiac pacemakers or
implantable cardiovascular-defibrillators.
Keyless operation system*
3-07
OA0X19E2
Locking and unlocking
3