Mitsubishi MOTORS 2018 MIRAGE, Owner'S Manual

Page: 24 / 354

4. While filling with fuel, hang the fuel cap
cord on the hook located on the inside of
the fuel tank filler door.
5. Insert the gun in the tank port as far as it
goes.
CAUTION
l Do not tilt the gun.
6. When the gun stops automatically, do
not fill with fuel any more.
7. To close, turn the fuel tank filler tube
cap slowly clockwise until you hear
clicking sounds, then gently push the
fuel tank filler door closed.
Installation of accessories
We recommend you to consult a
MITSUBISHI MOTORS Authorized Service
Point.
CAUTION
l Your vehicle is equipped with a diagnosis
connector for checking and servicing the
electronic control system.
Do not connect a device other than a diagno-
sis tool for inspections and service to this
connector. Otherwise, the battery could be
discharged, the electronic devices of the ve-
hicle could malfunction, or other unexpected
problems could result.
In addition, malfunctions caused by connect-
ing a device other than a diagnosis tool may
not be covered under warranty.
l The installation of accessories, optional
parts, etc., should only be carried out
within the limits prescribed by law in
your country, and in accordance with the
guidelines and warnings contained with-
in the documents accompanying this ve-
hicle.
l Installing electric components incorrect-
ly could lead to a fire. Please refer to the
Modification/alteration to the electrical
or fuel systems section within this own-
er’s manual.
l When installing the radio, for the re-
quired information (frequency, transmis-
sion output, installing procedure), con-
sult a MITSUBISHI MOTORS Author-
ized Service Point. If the frequency,
transmission output and installing condi-
tion are not appropriate, it can adversely
affect the electronic devices and could
lead to unsafe vehicle operation.
l
Using a cellular phone or radio set inside
the vehicle without an external antenna
may cause electrical system interference,
which could lead to unsafe vehicle oper-
ation.
l
Tyres and wheels which do not meet
specifications must not be used.
Refer to the “Specifications” section for
information regarding wheel and tyre
sizes.
l
When fitting accessories, ensure that
maximum gross vehicle weight and
maximum axle weight are not exceeded.
Important points!
Due to the large number of accessory and re-
placement parts of different manufactures
available in the market, it is not possible, not
only for MITSUBISHI MOTORS, but also
for a MITSUBISHI MOTORS Authorized
Service Point, to check whether the attach-
ment or installation of such parts affects the
overall safety of your vehicle.
Installation of accessories
2-04
OA0X19E2
General information
2