Mitsubishi MOTORS 2018 MIRAGE Owner'S Manual Download Page 192

Page: 192 / 354

Preparation for voice operation

To use the voice operation, press the
SPEECH button (A) first.

To play tracks from a
Bluetooth

device (vehicles

with Bluetooth

2.0

interface)

You can wirelessly connect a digital audio
player or cellular phone supporting Blue-
tooth

to listen to the tracks on the connected

device.

Refer to “Bluetooth

2.0 interface” on page

7-46 for the connecting method, etc.

The following explains the basic playback
method.

NOTE

The connected Bluetooth

device may not

operate correctly or its function may be limi-
ted.

A file protected by copyright may not be
able to playback.

It is recommended to adjust the equalizer of
the connected device to 0 db or neutral.

The voice operation is not available to ac-
cess music files on the connected Blue-
tooth

device.

Bluetooth

device control pan-

el and display

1- MEDIA button
2- PWR (On-Off) switch
3- BT (Bluetooth

) indicator

4- TRACK (Track number) indicator
5- Display

(Fast-reverse/Track down) button

(Fast-forward/Track up) button

8- DISP/> (Display/Title display) button
9- Play/Pause button

10- Stop button

11- RPT (Repeat) button

12- RDM (Random) button

To listen to tracks from a de-
vice connected via Bluetooth

1. Press the PWR button to turn on the au-

dio system. The system turns on in the
last mode used.

2. Press the MEDIA button several times to

switch to the BT-A (Bluetooth

) mode.

The  input  mode  changes  as  follows  ev-
ery  time  the  MEDIA  button  is  pressed:
CD  mode  →  iPod  mode  →  Bluetooth

mode* → AUX mode → CD mode.
The BT indicator are illuminated and
then the BT-A mode will be activated.

3. Connect your Bluetooth

device.

Refer to “Connecting the Bluetooth

2.0

interface and Bluetooth

device” on

page 7-52.

4. Playback starts automatically.

To play tracks from a Bluetooth

device (vehicles with Bluetooth

2.0 interface)

7-40

OA0X19E2

For pleasant driving

Summary of Contents for 2018 MIRAGE



































































































































































































































































































































































Search results

Summary of Contents for 2018 MIRAGE

Reviews:

Related manuals for 2018 MIRAGE

Brands by name

Popular brands

Mitsubishi MOTORS 2018 MIRAGE, Owner'S Manual

Search results

Summary of Contents for 2018 MIRAGE

Reviews:

Related manuals for 2018 MIRAGE

Brands by name

Popular brands