Mitsubishi Electric MELDAS MDS-B-SVJ2 Series, Specifications And Instruction Manual

Page: 53 / 297

Chapter 2 Wiring and Connection
2-7
•
Connection method
(a) When the wire is inserted directly
Insert the wire to the end pressing the button with a small flat-blade screwdriver or the like.
When removing the short-circuit bar
from across P-D, press the buttons of
P and D alternately pulling the
short-circuit bar. For the installation,
insert the bar straight to the end.
Twisted wire
Button
Small flat blade
screwdriver or the like
(b) When the twisted wires are put together using a bar terminal
Insert a bar terminal with the odd-shaped side of the pressured terminal on the button side.
Bar terminal for one wire
or
single strand
Bar terminal for two wires
When two wires are inserted into one opening, a bar terminal for two wires is required.