Mitsubishi Electric GOT SIMPLE Series, User Manual

Page: 38 / 310

36
4 PART NAME
4.2 Back Panel
Parts names of the back panel
No. Name Specifications
(1) RS-232 interface For communicating with controller (PLC, microcomputer board, RFID, etc) or personal
computer (OS installation, project data download, FA transparent) (D-sub 9-pin male)
(2) RS-422/485 interface For communicating with controller (PLC, microcomputer board, etc) (D-sub 9-pin female)
(3) RS-422 interface For communicating with controller (PLC, microcomputer board, etc) (D-sub 9-pin female)
(4) Ethernet interface For Ethernet communication with controller (PLC, microcomputer board, etc) (RJ-45
connector)
(5) USB interface (Device) USB interface for data transfer and saving
(6) Hole for preventing the USB cable from unplugging Hole for preventing the USB cable from unplugging with a banding band
(7) Terminating resistor setting switch For switching the terminating resistor setting of the RS-422/485 communication port to
330
Ω , 110 Ω , or OPEN
(8) Rating plate Model name, current consumption, production number, hardware version, and Boot OS
version are described.
(9) SD card interface Interface for mounting an SD card to the GOT
(10) SD card access LED ON: SD card is accessed, OFF: SD card is not accessed
(11) Vertical installation arrow mark For the vertical installation, install the GOT so that the arrow points upward.
(12) Power terminal Power terminal and FG terminal (for power supply (24VDC) to GOT and grounding)
(13) Ethernet communication status LED SD RD: Green light while data are being sent or received, 100M: Green light when the
transmission speed is 100Mbps