Mitsubishi Electric GOT SIMPLE Series, User Manual

Page: 221 / 310

16 GOT SELF CHECK (DEBUG)
16.1 Device Monitor Function
219
16
16
GOT SELF CHECK (DEBUG)
The debug includes functions to check the PLC system status and to improve troubleshooting efficiency.
The following is available as the debug.
16.1
Device Monitor Function
For a controller connected to the GOT, forcibly turning on or off devices of the controller and changing the set value or present
value are available.
System configuration
This section describes the controller names and connection types between the GOT and a controller that are applicable to the
device monitor function.
For details of communication units and cables for each connection type, refer to the following manual.

GOT2000 Series Connection Manual For GT Works3 Version1
Target controller
Required system application
Checking method of the version of basic system application and communication driver
Check the version of the basic system application and communication driver installed in the GOT at [System
Application Information] of the utility.
Refer to the following for details.

Page 163 OS information
Item Description Reference
Device monitor For a controller connected to the GOT, forcibly turning on or off devices of the
controller and changing the set value or present value are available.  Page 219 Device Monitor Function
FX list editor The sequence program of FX PLC can be edited.

Page 232 FX List Editor
FX3U-ENET-ADP
communication setting function The communication set value of the FX3U-ENET-ADP stored in the CPU can be
changed.

Page 261 FX3U-ENET-ADP
Communication Setting Function
Controller Connection type
QCPU (Q mode) Direct CPU connection, Computer link connection, CC-Link(G4) connection
QnACPU Direct CPU connection, Computer link connection
FX CPU Direct CPU connection
System application Version
Basic system application -
Communication driver MELSEC-Q/L/QnA -
MELSEC-FX -
CC-Link(G4) -