Mitsubishi Electric GOT SIMPLE Series, User Manual

Page: 87 / 310

11 COMMUNICATION INTERFACE SETTING (COMMUNICATION SETTING)
11.2 GOT IP Address Setting
85
11
Setting operation
1.
Touch the numerical part of the octet to be changed among the 1st to 4th
octets.
2.
When the ten-key pad appears, enter a numerical value in up to 3 digits,
and touch the
key. If a numerical value outside the setting range is
entered, the following error message appears. Enter a numerical value
again.
For the details of the setting range, refer to the following.

Page 261 Specifications
3.
If necessary, change the setting of [Per. S/W port No.] and [Transparent port
No.].
4.
After the setting change, touch the [×] key.
5.
When the screen shown on the left appears, touch the [YES] key.
Touch the numerical part
of the octet to be changed.
Touch
Touch[×]
Touch [YES]