Mitsubishi Electric GOT SIMPLE Series, User Manual

Page: 153 / 310

14 CLOCK SETTINGS (TIME SETTING AND DISPLAY)
14.1 Time Setting and Display
151
14
Adjusting the clock
Synchronize the clock data of the GOT with the clock data of the controller.
Clock adjustment setting
*1 If [Adjust the clock] is deselected or [Trigger Type] is set to [Sampling] in [GOT Setup] in the project data, only [Sampling] is selectable
as the trigger type for the clock adjustment in the utility.
*2 If [Adjust the clock] is deselected or [Trigger Type] is set to [Sampling] in [GOT Setup] in the project data, [No setting] is displayed in
[Device].
Settings of [Adjust] in the utility
Configure the settings in the utility and in [GOT Setup] on GT Designer3 by the same method.

GT Designer3 (GOT2000) Screen Design Manual
Function Description Setting range
Time setting Switch the Use/Disuse of Adjust. Disuse/Use
<Default: Disuse>
Reference CH No. Set a reference channel of the external controller. 1 to 2
<Default: 1>
Trigger type Set the trigger type for the clock adjustment.
*1
• When selecting [Sampling] for [Trigger type], set the sampling interval for the clock
adjustment.
• When selecting [Rise] or [Fall] for [Trigger type], information on the device set as a
trigger is displayed.
*2
Trigger type: Rise/Fall/Sampling
<Default: Sampling>
Sampling interval: 1 to 1440
<Default: 60>
Time zone of target unit Switch Specified/Unspecified of the time zone of target. Unspecified/Specified
<Default: Unspecified>
Time zone When selecting [Specify the time zone of target unit], set the time zone. GMT-12:00 to GMT+13:00
<Default: GMT+9:00>
Time difference from GMT Time zone of target is set by specifying the time difference from GMT. Hour: -12 to 13
Minute: 0, 15, 30, or 45
<Default: 0 hour 0 minute>