Mitsubishi Electric GOT SIMPLE Series, User Manual

Page: 200 / 310

198
15 CONTROL OF VARIOUS DATA (DATA CONTROL)
15.8 BACKUP/RESTORE
System configuration
This section describes the system configuration for the backup/restore function.
For connection type settings and precautions regarding the communication unit/cable and connection type, refer to the
following.

GOT2000 Series Connection Manual (Mitsubishi Products) for GT Works3 Version1
Target controller
*1 Use a PLC CPU with the function version of B or later.
*2 To restore the backup data containing a special parameter, use the following version of CPU.
· FX3U(C) version: 3.10 or later· FX3G(C) version: 2.00 or later
Connection type
This function can be used in the following connection types.
( :
Applicable, : Partly restricted, : Inapplicable)
*1 The LCPU does not support the connection type.
*2 When the GOT is connected to LCPU, use L6ADP-R2.
*3 Backup/Restore cannot be used when using CC-Link IE field network Ethernet adapter.
*4 The restoration cannot be performed to a QCPU with the factory-settings or whose memory is formatted.
Required hardware
The backup / restore, SD card is required.
Controller Model
MELSEC iQ-F FX5U, FX5UC, FX5UJ
QCPU(Q mode) Basic model
*1
Q00JCPU, Q00CPU, Q01CPU
High performance model
*1
Q02CPU, Q02HCPU, Q06HCPU, Q12HCPU, Q25HCPU
Universal model Q00UJCPU, Q00UCPU, Q01UCPU, Q02UCPU, Q03UDCPU, Q04UDHCPU,
Q06UDHCPU, Q10UDHCPU, Q13UDHCPU, Q20UDHCPU, Q26UDHCPU,
Q03UDECPU, Q04UDEHCPU, Q06UDEHCPU, Q10UDEHCPU,
Q13UDEHCPU, Q20UDEHCPU, Q26UDEHCPU, Q50UDEHCPU,
Q100UDEHCPU, Q03UDVCPU, Q04UDVCPU, Q06UDVCPU, Q13UDVCPU,
Q26UDVCPU
LCPU L02CPU, L06CPU, L26CPU, L26CPU-BT, L26CPU-PBT, L02CPU-P,
L06CPU-P, L26CPU-P, L02SCPU, L02SCPU-P
FX CPU
*2
FX0, FX0S, FX0N, FX1, FX2, FX2C, FX1S, FX1N, FX1NC, FX2N, FX2NC,
FX3U, FX3UC, FX3G, FX3GC, FX3S
Function Connection type between GOT and controller
Name Description Direct CPU
connection Computer link
connection Ethernet
connection
Backup/restore Backs up setting data for a controller connected to the GOT and restores
the data to the controller.
*2 *4 *3*4