Mitsubishi Electric GOT SIMPLE Series, User Manual

Page: 253 / 310

16 GOT SELF CHECK (DEBUG)
16.2 FX List Editor
251
16
Sequence program all clear
Clears all the sequence programs.
Operation
Example
Clears all the sequence programs.
Items cleared when All Clear for a sequence program is performed
When All Clear is executed, the parameters before program execution are initialized and Latch Clear is
executed.
The memory space becomes the default value, the comment area a 0 block, the file register space a 0 block,
and keywords unregistered.
After All Clear, set the above parameters etc. again.
(WRITE mode)
MODE NOP A GO
Stop the FX PLC
MODE
OK
OK
Cancel
NOP
A GO
! Caution
The program will be erased.
Press "OK" to continue.
0 NOP
1 OUT Y 000
2 LDI M 100
3 MOV 12
0 NOP
1 NOP
2 NOP
3 NOP
< WRITE >
< READ >
Stop the FX PLC
Set the
WRITE
mode.