Mitsubishi Electric GOT SIMPLE Series, User Manual

Page: 202 / 310

200
15 CONTROL OF VARIOUS DATA (DATA CONTROL)
15.8 BACKUP/RESTORE
■
Universal model QCPU
*1 The file register in the Flash card installed in the CPU is always restored without confirming saving.
Select whether restoring or not the file register stored in the SRAM card or standard RAM in the dialog box displayed when restoration is
executed.
When the file register is not restored, the existing file register is deleted.
Therefore, programs of the controller may not work normally.
If a problem occurs in the operation of the controller after restoration, perform the restoration again, including to the file register.
*2 The item can be backed up only.
■ LCPU
*1 The file register in the Flash card installed in the CPU is always restored without confirming saving.
Select whether restoring or not the file register stored in the SRAM card or standard RAM in the dialog box displayed when restoration is
executed.
When the file register is not restored, the existing file register is deleted.
Therefore, programs of the controller may not work normally.
If a problem occurs in the operation of the controller after restoration, perform the restoration again, including to the file register.
*2 The item can be backed up only.
Item Description File name
Parameter Parameter for operating a programmable controller PARAM.QPA
Intelligent function module parameter Parameter for intelligent function modules IPARAM.QPA
Program Program that the CPU operates (Including SFC program) ***.QPG
Device comment Device comment to be stored in a programmable controller ***.QCD
Boot operation specification file Batch file for starting programs stored in ROM and others AUTOEXEC.QBT
Device initial value Setting the device initial value ***.QDI
File register
*1
Data stored in file registers ***.QDR
Sampling trace file
*2
Sampling trace data that the specified device data is continuously collected
with the specified timing ***.QTD
Programmable controller user data Any user-created data stored in a memory card ***.*** (Optional)
File for storing device data Device data used for the SP.DEVST and S.DEVLD instructions DEVSTORE.QST
Drive heading The heading of the drive QN.DAT
Remote password Remote password settings 00000000.QTM
Monitor sequence extension Data to increase the speed of monitors from other stations. MONITOR.Q0*
Latch data backup file Stores the backup data for the latch data backup function to the standard
ROM. LCHDAT00.QBK
Item Description File name
Parameter Parameter for operating a programmable controller PARAM.QPA
Intelligent function module parameter Parameter for intelligent function modules IPARAM.QPA
Program Program that the CPU operates (Including SFC program) ***.QPG
Device comment Device comment to be stored in a programmable controller ***.QCD
Boot operation specification file Batch file for starting programs stored in ROM and others AUTOEXEC.QBT
Device initial value Setting the device initial value ***.QDI
File register
*1
Data stored in file registers ***.QDR
Sampling trace file
*2
Sampling trace data that the specified device data is continuously collected
with the specified timing ***.QTD
Programmable controller user data Any user-created data stored in a memory card ***.*** (Optional)
File for storing device data Device data used for the SP.DEVST and S.DEVLD instructions DEVSTORE.QST
Drive heading The heading of the drive QN.DAT
Remote password Remote password settings 00000000.QTM
Monitor sequence extension Data to increase the speed of monitors from other stations. MONITOR.Q0*
Latch data backup file Stores the backup data for the latch data backup function to the standard
ROM. LCHDAT00.QBK
Data logging setting file Setting the data logging LOGCOM.QLG
LOG01.QLG to LOG10.QLG
Menu definition file Menu defining files MENUDEF.QDF