Mitsubishi Electric GOT SIMPLE Series, User Manual

Page: 83 / 310

11 COMMUNICATION INTERFACE SETTING (COMMUNICATION SETTING)
11.1 Standard I/F Setting
81
11
For Standard I/F-4(Ethernet)
Communication parameter setting by drawing software
Set the communication parameter for each communication driver by selecting [Common]
[Controller
Setting].

GT Designer3 (GOT2000) Screen Design Manual
1.
Touch the driver display box of a communication parameter to be
set.
2.
The screen is switched to the communication detail setting. Set the
communication parameter on this screen.
GOT IP address setting

Page 84 GOT IP Address Setting
3.
When the [ ] button is touched, it returns to the previous screen.
4.
Touch the [ ] button to display the window confirming whether to
save the settings.
5.
Touch the [YES] button to save the settings and restart. Touch the
[NO] button to discard the changes.